21
Core temperature probe
en
Meat:
For large pieces of meat, insert the core
temperature probe at an angle from above as far as it
will go into the meat.
For relatively thin pieces of meat, insert the meat probe
from the side at the thickest point.
If there is more than one piece of meat, insert the core
temperature probe into the middle of the thickest piece.
Poultry:
Insert the core temperature probe as far as it
will go into the thickest point in the breast. Depending
on its structure, insert the core temperature probe into
the poultry crossways or lengthways. With poultry, make
sure that the tip of the core temperature probe does not
protrude into the cavity in the middle of the bird.
Fish:
Insert the core temperature probe behind the head
as far as it will go towards the spine. Place the whole
fish onto the wire rack and prop it up in the swimming
position using half a potato.
Turning the food:
If you want to turn the food, do not
remove the core temperature probe. Once you have
turned the food, check that the core temperature probe
is correctly positioned in the food.
If you remove the core temperature probe during
operation of the appliance, all settings are reset and you
have to apply them again.
Setting the core temperature
Caution!
Damage to the core temperature probe:
The core temperature probe may be damaged if the
distance between the grill heating element and the core
temperature probe is too small. Make sure that the
distance between the grill heating element and the core
temperature probe or the cable of the core temperature
probe is a few centimetres. The meat may expand during
the cooking process.
Caution!
Damage to the core temperature probe:
Do not trap the cable of the core temperature probe in
the appliance door.
1
Slide the food into the cooking compartment with
the core temperature probe inserted. Plug the core
temperature probe into the socket in the cooking
compartment and close the appliance door.
2
Turn the function selector to the required type of
heating.
3
Use the rotary selector to set the cooking
compartment temperature.
4
Touch the
+
symbol. Using the rotary selector, set
the desired core temperature for the food and press
+
to confirm.
The set core temperature must be higher than the
current core temperature.
5
The appliance heats up using the type of heating
that has been set.
The current core temperature is shown in the
display, and beneath it, the set core temperature.
You can change the set core temperature at any
time.
6
After preheating, the display shows an estimated
cooking time approx. 5–20 minutes into the cooking
time. Touch the
(
symbol to display the current core
temperature.
Once the food reaches the core temperature that has
been set, an audible signal will sound. Cooking ends
automatically. Confirm with
™
and turn the function
selector to
0
.
Estimated cooking time
After preheating, if the appliance has a temperature
setting above 100 °C, when the core temperature probe
is inserted, the display shows an estimated cooking time
approx. 5–20 minutes into the cooking time.
The estimated cooking time is continually updated. The
longer the cooking process lasts, the more precise the
estimated cooking time becomes. Do not open the
appliance door; this distorts the estimated cooking time.
The estimated cooking time is displayed in normal
operation and in the automatic programme.
The current core temperature is shown in the display
when you touch the
(
symbol.
