![Gaggenau BSP2601 1 Series Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/gaggenau/bsp2601-1-series/bsp2601-1-series_user-manual-and-installation-instructions_3601816030.webp)
en
Troubleshooting
30
2.
Undo the knurled nuts.
3.
Lift the shelf supports slightly sideways away from
the screw and pull them out towards the front .
4.
Clean the shelf supports in hot soapy water or in the
dishwasher.
16.8 Fitting the shelf supports
ATTENTION!
Incorrect spare parts may lead to corrosion in the
cooking compartment.
▶
Only use the original knurled nuts.
1.
Fit the shelf supports the right way round.
‒
Position the stop position in the rear area of the
cooking compartment.
2.
Slide the shelf supports onto the bolts at the back
and fit them at the front.
3.
Tighten the knurled nuts.
Note:
If you lose a knurled nut, you can order this as a
spare part from our customer service.
17 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced with a special connection cable,
which is available from the manufacturer or his Cus-
tomer Service.
17.1 Malfunctions
Fault
Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
Operating error.
▶
Switch off the circuit-breaker for the appliance in the fuse box and switch it back on after
approx. 60 seconds.
The appliance does
not work. Display
shows "Appliance
locked. Descaling re-
quired."
Build-up of limescale in the appliance.
▶
Start the descaling programme →
.