Troubleshooting
en
21
a
The display shows a message.
6.
Wipe the cooking compartment dry with a soft cloth.
Cleaning the water tank
1.
Remove the water tank from the appliance.
2.
Remove the tank cover.
3.
Clean the water tank and the tank lid in the dish-
washer.
12.5 Removing the shelf supports
The wire racks can be removed for cleaning.
1.
Place a dishcloth in the cooking compartment to
protect the stainless steel from scratches.
2.
Lift the shelf supports slightly at the front and pull
them out sideways towards the front .
3.
Clean the shelf supports in hot soapy water or in the
dishwasher.
12.6 Fitting the shelf supports
1.
Fit the shelf supports the right way round.
‒
Position the stop position in the rear area of the
cooking compartment.
2.
Slide the back of the shelf supports onto the bolts
and attach them at the front.
13 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
13.1 Malfunctions
Fault
Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
Operating error.
▶
Switch off the circuit-breaker for the appliance in the fuse box and switch it back on after
approx. 60 seconds.
The appliance does
not work. Display
shows "Appliance
locked. Descaling re-
quired."
Build-up of limescale in the appliance.
▶
Start the descaling programme →
.
Despite descaling,
"Please descale" ap-
pears on the display.
Build-up of limescale in the appliance, incorrect descaler used.
1.
Use the specified descaling tablets.
2.
Start the descaling programme →
.
The appliance does
not start.
The appliance door is not fully closed.
▶
Close the appliance door.
Содержание BSP2201.1
Страница 1: ...en User manual and installation instructions BSP2201 1 BSP2211 1 Steamer Gaggenau ...
Страница 45: ......
Страница 46: ......
Страница 47: ......