Cleaning and servicing
en
31
Possible cause
Solution
The drain filter is missing.
Ensure that the drain filter
remains inserted in the
cooking compartment
floor while the cleaning
programme is in pro-
gress.
The power has failed.
Following a power cut
that lasts longer than
3 minutes, the cleaning
programme is ended with
a short programme.
Dirt is heavily baked on.
Run the cleaning pro-
gramme again to remove
stubborn dirt.
16.5 Drying programme
You can use the drying programme to dry the cooking
compartment quickly after cleaning or steaming.
The drying programme runs for 20 minutes.
ATTENTION!
Heat damages the water tank.
▶
Do not dry the water tank in the hot cooking com-
partment.
Starting the drying programme
1.
Set the function selector to .
2.
Use the rotary selector to select the drying pro-
gramme.
a
The display shows
.
3.
Press to confirm.
a
The display shows the drying time as 20 minutes.
4.
Press to start.
a
The display shows the drying time that has elapsed.
a
The light in the cooking compartment remains
switched off.
a
A signal tone sounds after 20 minutes.
a
The display shows a message.
5.
Press to confirm.
a
The drying programme has ended.
6.
Allow the appliance to cool down.
7.
Polish the cooking compartment and door pane with
a soft cloth.
16.6 Descaling programme
You can use the descaling programme to descale and
rinse the appliance fully automatically using special de-
scaling tablets.
ATTENTION!
Limescale may damage the appliance.
▶
Descale the appliance regularly.
Using the wrong descaler may damage the appliance.
▶
Only use the specified descaling tablets.
The descaling tablet may damage the cooking com-
partment.
▶
Use the descaling tablet for the descaling pro-
gramme only.
▶
Place the descaling tablet into the water tank.
▶
Never place the descaling tablet in the cooking
compartment or heat it up in the cooking compart-
ment.
The descaling tablets can be obtained from customer
service, our website or the online shop.
If you descale the appliance regularly, your appliance
will be in a good condition.
Depending on the water hardness and the use of the
appliance, a message on the display reminds you to
run the descaling programme.
To prevent damage to the appliance, the appliance
locks the operating modes that use steam after this
message has been repeated. You can still use the ap-
pliance to run operating modes that do not require
steam. You can only use the appliance without any re-
strictions after you have run the descaling programme.
The descaling programme takes 1 hour 45 minutes
from beginning to end. After 1 hour 30 minutes, empty,
clean and refill the water tank.
Even if you use a water-descaling system, descaling
may be necessary, depending on the water type and
your use of the appliance.
Preparing the descaling programme
WARNING ‒ Risk of scalding!
The descaling tablets may cause chemical burns in the
mouth, throat, eyes and on the skin.
▶
Follow the safety instructions on the packaging of
the descaling tablets.
▶
Avoid the skin coming into contact with the descal-
ing tablets.
▶
Keep children away from the descaling tablets.
The descaling solution may cause chemical burns in
the mouth, throat and eyes or on the skin.
▶
Avoid the skin coming into contact with the descal-
ing solution.
▶
Keep children away from the descaling solution.
▶
Do not drink the descaling solution.
▶
The descaling solution must not come into contact
with food.
▶
Clean the water tank in the dishwasher or thor-
oughly by hand before you next use the appliance.
ATTENTION!
Using the wrong descaler may damage the appliance.
▶
Only use the specified descaling tablets.
1.
Set the function selector to .
2.
Use the rotary selector to select the descaling pro-
gramme.
You cannot cancel the descaling programme. Al-
ways allow the descaling programme to run to the
end.
a
The display shows
.
3.
Press to confirm.
4.
Remove all accessories from the cooking compart-
ment.
5.
Remove the water tank from the appliance and take
off the lid.
6.
Remove the descaling tablet from the plastic pack-
aging.