Gaggenau BS 450/451, Инструкция по эксплуатации

Страница: 39 / 60

39
Trouble shooting
en
3
Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
m
Warning – Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into
the switched on LED lights for longer than 100 seconds.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
Disruption Possible cause Solution
Appliance not working, no display Plug not inserted Connect the appliance to the electricity
mains
Power failure Check whether other kitchen appliances
are working
Fuse defective Check in the fuse box whether the fuse
for the appliance is in working order
Operating error Switch off the fuse for the appliance in
the fuse box and switch it on again after
about 60 seconds
The appliance does not work, the dis-
play shows "Device locked. Descaling
required." Build-up of limescale in the appliance Start the descaling programme
~
"Descaling programme"
on page 37
Despite descaling, "Please descale"
appears on the display Build-up of limescale in the appliance,
wrong descaler used Use the specified descaling tablets,
start the descaling programme
~
"Descaling programme"
on page 37
Appliance cannot be started Appliance door is not quite closed Close appliance door
The appliance does not work, the dis-
play shows "E182" No water available in the appliance Take out the water tank and verify that
the suction pipe in the tank is straight,
not kinked. Please contact the after-
sales service if the error message per-
sists.
The appliance is not working and the
display does not respond.
0
appears
on the display
Childproof lock activated Deactivating the childproof lock
~
"Childproof lock" on page 21
Appliance switches off on its own Safety shut-off: the appliance has not
been operated for longer than 12 hours Confirm the message with
™
, switch off
the appliance and set it again.
Appliance does not heat up,
°
appears
in the display
Appliance is in demo mode Deactivate the demo mode in the basic
settings
The appliance cannot be started, the
display shows an error message The water tank is empty Fill the water tank
The core temperature probe is inserted;
99 °C is displayed Moisture on the core temperature probe
shaft or on the socket in the cooking
compartment Move the core temperature probe shaft
in and out of the socket in the cooking
compartment several times
The core temperature probe is inserted
but the
+
symbol is not displayed
Moisture on the socket in the cooking
compartment Move the core temperature probe shaft
in and out of the socket in the cooking
compartment several times
No steam visible in the oven Steam above 100°C is invisible This is normal
Powerful steam outlet at the top of the
door The operating mode has been changed This is normal
A lot of steam escapes at the side of the
door Door seal soiled or loose Clean the door seal and insert it in the
groove