Gaggenau AW 442, Инструкция по эксплуатации

Страница: 9 / 48

9
Cleaning and maintenance
m
Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
m
Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
m
Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
m
Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Cleaning agents
Observe the information in the table to ensure that the
different surfaces are not damaged by using the wrong
type of cleaning agent. Do not use
▯
harsh or abrasive cleaning agents,
▯
cleaning agents with a high concentration of
alcohol,
▯
hard scouring pads or sponges,
▯
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Degreaser (product no. 00311297)
Intensive degreaser for effectively removing grease
deposits in the extractor hood. Ideal for pre-treating
metal grease filters.
Stainless steel care cloths (product no. 00311134)
Used to care for stainless steel surfaces. Impregnated
with special oil to prevent the accumulation of dirt and
fingerprints.
Area Cleaning agents
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth.
Clean stainless steel surfaces in the
direction of the grain only.
Special stainless steel cleaning prod-
ucts are available from our after-sales
service or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Aluminium and
plastic Glass cleaner:
Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Operating controls Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth.
Risk of damage to the electronics from
penetrating moisture. Never clean oper-
ator controls with a wet cloth.
Do not use any stainless steel cleaners.