Gage Bilt GB808HVB-100, Оригинальное руководство пользователя

Страница: 10 / 24

10 8/18 REV. 2/23
GB808HVB - 100 INSTALLATION TOOL
HOW TO USE THE GB808HVB - 100 POWER UNIT
The GB808 series pneudraulic pump is designed to work in conjunction with Gage Bilt ’ s split handle (SHA) or split riveter (SRA) rivet
installation tools.
WARNING:
Only qualified and trained operators shall install, adjust or use the assembly power tool for non - threaded
mechanical fasteners.
WARNING:
Operator MUST read and understand all warnings and cautions.
WARNING:
It is required that eye protection, hearing and foot protection be worn during operation.
WARNING:
The users or the user ’ s employer must assess specific risks that could be present as a result after each use
based on their application.
● Ensure there is adequate clearance for tool and operator's hands before proceeding. Keep fingers clear of any
moving parts. Keep fingers clear from fasteners and installed materials. Severe personal injury may result.
● Verify that hydraulic hose fittings and couplings, air and electrical connections are secure.
● Verify the air lines and/or hydraulic hoses are not a trip hazard.
● Ensure that there are no electrical cables, gas pipes, etc., which can cause a hazard if damaged by the tool
.
● Do not use with any unapproved installation tool
.
WARNING:
Do not actuate fastener in the air. Personal injury from fastener ejecting may occur.
CAUTION:
Do not use beyond the design intent.
Images may not reflect actual tool or fastener
Blind Fasteners
1. Insert fastener into workpiece.
2. Insert fastener into nose assembly.
Note: Always hold tool so pulling head is perpendicular to surface
of material in which fastener is being installed. Exert firm pressure
against fastener during installation.
3. Press actuator to start cycle.
4. Release actuator as soon as fastener breaks.
5. Repeat steps 1 - 4.