4
Rev. 1/23
GB784SH INSTALLATION TOOL S/N: 1008 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
5 lbs. (2.27 Kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.49 bar) Max.
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.875" (22.2 mm)
Rated pull load
-
2,650 lbs. (11.79 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested –
No Hazards Found
The GB784SH is a pneumatic
-
hydraulic hydro
-
shift installation tool designed specifically for the efficient installation of the 2000 series
CHERRYLOCK®, NAS1398, NAS1399, NAS1738 and NAS1739 double action blind rivets. The handle and head assembly when held
in hand weighs 5 lbs. (2.27 kg). The GB784SH has a .875" (22.2 mm) fastener setting stroke and a rated pull load of 2,650 lbs. (11.79 kN)
with 90 psi (6.2 bar) of air pressure at the air inlet.
The GB784SH installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) Max. of air pressure, with 90 psi. (6.2 bar) providing the maximum
efficiency. At 90 psi (6.2 bar) of air pressure, the GB784SH does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB784SH comes with 3 feet (.91 m) of hose. Please consult our engineering department for specific applications.
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on pg. 23 for nose assembly recommendations).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB784SH can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
