10
REV . 10/14
S/N: 1118 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
WARNING:
Dispose of hydraulic oil
in accordance with all environmental regulations applicable in your area.
Remove nose assembly from tool before attempting disassembly of head assy.
Remove end cap (731903). Push against piston (731909) to slide it out of rear of head cylinder (731910). Be careful not to damage
threads or cause burrs on polished piston (731909) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque
the four button-head cap screws (A-928) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
731139 - SCREW-
PISTON ROD CAP
731134 - BACK-UP RING
(2 REQ'D)
PISTON ROD ASSY (731333)