4
Rev. 4/22
GB714SH INSTALLATION TOOL S/N: 1003 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.50 lbs. (1.1 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar) Max.
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.590" (15 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
6,400 lbs. (28.4 kN)
Vibration
-
Tested
-
No Hazards Found
The GB714SH is a pneumatic
-
hydraulic split handle riveter designed specifically for the efficient installation of a wide range of blind rivets
and lockbolt fasteners. This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head
assembly when held in hand weighs 2.50 lbs. (1.1 kg). The entire split handle riveter weighs 7.50 lbs. (3.4 kg). It has a
.590” (15
mm)
fastener setting stroke.
The GB714SH split handle riveter operates on 90 to 100 psi. (6.2
-
6.9 bar) Max. of air pressure, with 90 psi. (6.2 bar) providing maximum
efficiency. At 90 psi. (6.2 bar) air pressure, the GB714SH does not exceed 81.5 dB(A) and consumes 6 cfm at 20 cycles per minute.
The GB714SH comes with 8 feet (2.4 m) of hose. Vacuum systems are available for this tool, please consult our engineering department
for specific applications.
The air inlet has a 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See accessories pg. 20 for nose
assembly recommendations).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB714SH can be operated between 0ºF —
118ºF (
-
17.8ºC / 47.8ºC)
