REV. 10/14
10
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assembly and adapter from tool before attempting disassembly of head assy.
Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder assy (703134). Be careful not
to damage threads or cause burrs on polished piston rod assy (744136) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
703007 - SLEEVE EXTENSION
70856 - JAM NUT
703013 - DRAWBOLT EXTENSION
703011 - TUBE
401089 - BACK-UP RING
S834 - O'RING
703134 - HEAD CYLINDER
ASSY
405865 - POLYSEAL
703607 - PISTON
S834 - O'RING
400788 - O'RING
S829 - O'RING
401816 - PLUG
400788 - O'RING
O'RIN
G IN P
OLSY
SEAL
MUS
T FACE IN
THIS
DIRECTION
A-663 - HANGER
703560 - HOSE GUARD (NOT SHOWN)
402482 - B.H.C.S.
S572 - STAT-O-SEAL
704130
S572 - STAT-O-SEAL (2)
402482
BUTTON HEAD
CAP SCREW (2)
744303 - MANIFOLD-HANDLE
S1181 - BARBED FITTING (2)
A-144 - HOSE CLAMP (2)
704311 - AIR LINE
204304 - SWIVEL ASSY
(INCLUDES 401080 & 403764)
400061
SOCKET HEAD
CAP SCREW (2)
400066
SOCKET HEAD
CAP SCREW (2)
724017 LEVER
ASSY
A-317
HYDRAULIC HOSE
744306
MANIFOLD-HEAD
ASSY
704129 - GASKET
S832 - O'RING
AIR ACTUATOR
ASSY
