7
REV. 9/18
GB2620PT / GB2620PTA INTALLATION TOOL
When the installation tool is connected to a powerunit, operation is controlled by an electric actuator (240122) (GB2620PT) in the handle.
When the actuator is depressed, a directional valve in the powerunit directs oil to the front side of the piston forcing it and the nose
assembly collet rearward. This action causes the jaws to clamp onto the fastener pintail and pull the sheets together. The anvil is
forced forward, swaging the collar into locking grooves of the fastener. Further force breaks the pintail off, approximately flush with
the collar.
When the actuator is released the directional valve reverses oil flow to the back of the piston and pushes the nose assembly off of
the swaged fastener. The pintail ejector hydraulically pushes the spent pintail out of the nose assembly.
PRINCIPLE OF OPERATION
HYDRAULIC DIAGRAM
Images may not reflect actual tool
Piston Travel
PULL Cycle
RETURN Cycle
Piston Travel
Relief
Valve
Actuator
(PULL)
Pressurized Oil
(RETURN)
Unpressurized Oil
Pressurized Oil
Unpressurized Oil
Relief
Valve
Actuator
(PULL)
Unpressurized Oil
(RETURN)
Pressurized Oil
Содержание GB2620PT
Страница 13: ...13 REV 9 18 GB2620PT GB2620PTA INTALLATION TOOL GB2620PT PARTS LIST Electric Actuated ...
Страница 14: ...14 REV 9 18 GB2620PT GB2620PTA INTALLATION TOOL GB2620PTA PARTS LIST Air Actuated ...
Страница 19: ...19 REV 9 18 GB2620PT GB2620PTA INTALLATION TOOL This page intentionally left blank ...