27
will emerge gradually from com-
plete darkness. To fade-in a scene,
depress trigger release halfway,
then depress fade control switch
and watch the movement of the
needle in the viewfinder. As the
needle comes to a stop at the
extreme right end
(
Fig. 27
),
start
the camera and release the fade
control switch.
When the control is used for a
fade-out, the image in the pro-
jected scene will turn dark gradu-
ally. To fade-out at the end of a
scene, depress the fade control
switch while the camera is run-
ning and hold it depressed. Keep
the camera running until the
needle in the viewfinder reaches
the black portion within the red
segment (as shown in
Fig. 27
).
REMOTE CONTROL
The accessory remote control
cord has a plug at one end and a
switch at the other.
Place the camera on a tripod or
other solid support, aim it at the
scene, focus, then turn the
viewfinder light-stop knob to the
left. Insert the plug into the remote
control socket, slide the remote
switch to "off", then press the
trigger and lock it. Locking the
trigger in the "running" position
will not operate the camera when
the remote control cord is
plugged in.
Operate the camera from a
distance with the remote control
switch.
LENS SHADE
(black rubber ring packed sepa-
rately in camera box)
Snap open collapsible lens shade
so that smooth side is out. Screw
metal center ring, clockwise, into
threaded front end of lens mount.
Do not force.
Use lens shade outdoors and in-
doors, to prevent glare caused by
stray light falling on lens. Do not
use lens shade when a movie
li ght is attached to the camera.
15
