GADLEE GT 25 Series, Руководство оператора

Страница: 30 / 56

ENGLISH
18
• Replace the squeegee in its support following the instructions in paragraph 6.2.
9.2.3 Fuses: replacement (cable models) (fig. M)
The fuses protecting the electrical components are on the electrical components box. To
replace:
• Make sure the dirty water tank is empty and empty if necessary;
• Lift the dirty water tank to access the electrical components compartment;
• Open the cover of the fuse holder on the electrical components box and remove the
fuse;
• Fit a new fuse and close the fuse holder cover.
• Lower the dirty water tank.
Fuse table:
for the complete fuse table, consult the spare parts catalogue.

IMPORTANT
Never fit a fuse with a higher Amp value than the intended one.
If a fuse continues to blow, the fault in the wiring, boards (if present) or motors must be
identified and repaired. Have the machine checked by qualified personnel.
9.3 Periodic maintenance
9.3.1 Daily maintenance
Every day at the end of work perform the following operations:
• Disconnected the machine from the power supply;
• Empty the recovery tank and clean it, if necessary;
• Clean the squeegee blades, checking that they are not excessively worn; replace them,
if necessary;
• Make sure that the squeegee suction hole is not clogged, freeing it from any encrusted
dirt;
• Models with battery: recharge the batteries according to the procedure described
above.
9.3.2 Weekly maintenance
• Clean the floater of the recovery tank and check that it works correctly;
• Clean the suction tube;
• Clean the recovery tank and the solution tank;
•
Models with battery:
check the level of the electrolyte in the batteries and top up with
distilled water, if necessary.
9.3.3 Six-monthly maintenance
• Have the electric system, calibrations checked by qualified staff;