Gadhouse HENRY, Руководство пользователя, Страница: 8 / 13

15
The anti-skating force must be adjusted corresponding to the tracking
force as follows:
Tracking Force
5-10 mN
10-15 mN
15-20 mN
20mN and bigger
1st from bearing ring
2nd from the bearing ring
3rd from the bearing ring
4th from the bearing ring
Groove in the stick
Once the tonearm is correctly balanced return it to its’ rest. Hold the
Counterweight without moving it, and gently rotate the Down force Scale
ring until the zero is in line with black line on the rear of the tonearm.
Check whether the arm still balances out.
Rotate the counterweight counter clockwise (seen from the front) to
adjust the down force according to the cartridge manufacturer’s recom-
mendations. One mark on the scale represents 0.05g of down force.
NOTE: The recommended down force for the factory fitted cartridge
is 3.5±0.5g.
ANTI-SKATE FORCE ADJUSTMENT
0
2
0.5
2
1.5
0
14
Turntable Function (LP)
1. Press the Power Switch to turn on the power.
2. Press the MODE button to choose turntable mode, the indicator will
light in red.
3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is
in place whenever the turntable is being moved or cleaned.
5. Open the tonearm clip from left to right.
6. Press the PLAY / STOP button once, the platter start turning.
SPEAKER CONNECTION
1.Slip the loop of the anti-skating
weight’s thread over the
3rd
groove of the stick to set correct
anti-skating force for the
factory-fitted cartridge.
2.Feed the thread through the loop
of the wire hanger.
The spring clip speaker terminals deliver amplified, speaker-level signals
as output and should be connected with the passive speakers. The Red
plug connects with the Right channel and the White plug connects with
the Left channel.
OPERATION
INPUT