Gadhouse HENRY Скачать руководство пользователя страница 3

SAFETY INFORMATION

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EX-
TENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN 
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR 
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of 
uninsulated “dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude to constitute 
a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended 
to alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature 
accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS
1.   Read these instructions.
2.   Keep these instructions.
3.   Heed all warnings.
4.   Follow all instructions.
5.   Do not use this apparatus near water.
6.   Clean only with a dry cloth.
7.   Do not block any of the ventilation openings. Install in accordance 
with the manufacturer’s instructions.
8.   Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.   Do not defeat the safety purpose of the polarized or grounding plug. 
A polarized plug has two blades with one wider than the other. A grounding 
plug has two blades and a third grounding prong. The wide blade or the 

CONTENT

            

Introduction   

 

 

 

 

 

 

          04

Safety Information       

 

 

 

 

 

          05

Specification    

 

 

 

 

 

                        09

Accessories included    

 

 

 

 

                    1 1

Product Description    

 

 

 

 

 

           12

Getting started  

 

 

 

 

 

 

            13

 

Initial Set Up    

 

 

 

 

                         13

 

Cartridge Down Force Adjustment                                                         13

 

Speaker connection                                                                                    14

Operation                              

 

 

 

 

 

           15

 

INPUT   

 

 

 

 

 

 

           15

 

 

Turntable Function (LP)  

 

 

 

           15 

 

 

Bluetooth Receiver Function (BT)    

 

           15

 

OUTPUT  

 

 

 

 

 

                         16

 

 

Stereo System Output  

 

 

 

           16

 

 

USB-Encoding  

 

 

 

 

           16

Troubleshooting guide  

 

 

 

 

 

           17 

Cartridge Replacement  

 

 

 

 

 

           20

Maintenance and Care          

 

 

 

 

           21

Contacting customer service       

 

 

 

 

           22  

 

 

 

 

 

         

INTRODUCTION

Thank you for purchasing HENRY Turntable.

To assure maximum satisfaction from this product, please read the 
information and follow the instructions presented in this manual. 
Please keep the manual in an accessible location for future reference. 

We suggest that you save all the packaging materials for possible future 
storage, moving or shipping. 

Caution: To avoid stylus damage, make certain the included stylus guard 
is in place whenever the turntable is being installed, moved or cleaned.

04

05

Содержание HENRY














Отзывы: