Gadhouse HENRY Скачать руководство пользователя страница 4

third prong is provided for your safety. If the provided plug does not fit into 
your outlet, consult an electrician for replacement of the obsolete outlet.
10.   Protect the power cord from being walked on or pinched particularly 
at plugs, convenience receptacles, and the point where they exit from the 
apparatus.
11.   Only use attachments/accessories specified by the manufacturer.
12.   Use only with a cart, stand, tripod, bracket or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use caution 
when moving the cart/apparatus combination to avoid injury from tip-over.
13.   Unplug this apparatus during lightning storms or when unused for 
long periods of time.
14.   Refer all servicing to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.
15.   Where a mains plug is used as the disconnect device, the disconnect 
device shall remain readily operable.
16.   Please keep the unit in a good ventilation environment.
17.   Apparatus shall not be exposed to dripping or splashing and no objects 
filled with liquids, such as vases, shall be placed on apparatus. 
18.   The user should not attempt to service the appliance beyond that 
described in the operating instructions. All other servicing should be 
referred to qualified service personnel.
19.   Unplug this product from wall outlets and refer servicing to qualified 
service personnel under the following conditions:
 

When the power supply cord or plug is damaged.

 

If liquid has been spilled, or objects have fallen into the product.

 

If the product has been exposed to rain or water.

 

If the product does not operate normally by following the operating 

instructions. Adjust only those controls that are covered by the operating 
instructions, as an improper adjustment of other controls may result in 
damage and will often require extensive work by a qualified technician to 
restore the product to its normal operation.

SAFETY INFORMATION

FOR U.S. MODELS

Federal Communications Commission (FCC)

Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
 

(1) this device may not cause harmful interference, and

 

(2) this device must accept any interference received, including 

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:
 

- Reorient or relocate the receiving antenna.

 

- Increase the separation between the equipment and receiver.

 

- Connect the equipment into an outlet on a circuit different from  

   

that to which the receiver is connected.

 

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate
the equipment.

06

07

Содержание HENRY














Отзывы: