GABRIEL KERAMIK AB
7
min 50
min 50
293 mm
25 mm
25 mm
293 mm
1
1
2
2
3
Assembly
Mark on the floor exactly where
the stove is going to be placed.
The opening for convection air
(fan) can be either from the left or
right side by turning the baseblock
up-side-down.
Set the base block (1) with a
10 mm thick layer of mortar on the
prepared floor. Make sure the regu-
lation distance to the wall is kept.
Level vertically and horizontally.
Check the distance to the
wall (min. 50 mm)
Set the firebox block (2) with
mortar. Level vertically at the rear
with the baseblock.
Seal/insulate between the
firebox blocks.
Check that the height is
within the tolerance
(293 mm).
Before starting the assembly,
make sure that the support is
approved according to your
building permit and that it is in
level with the floor.
