GABRIEL KERAMIK AB
17
2030 mm
14
15
30 mm
5 mm
30
31
32
30 mm
5 mm
Assembly
Set the “damper” lid (14) with
mortar. Level vertically and horizon-
tally.
Check that the height is
within the tolerance (2030
mm)
Set the damper in a bed of mortar
and make sure it runs freely.
The inside of the blocks shall be
rendered with clay mortar (easiest
done before the assembly).
Top flue connection
Set the blocks (15) with mortar.
Join the two blocks together with
the heat-resistant silicon or mortar.
Rear flue connection
to an
existing chimney. Cut the back of
the blocks for a suitable connec-
tion.
Render and brush the soot
channel surfaces.
Make sure the damper runs
freely.
The two blocks (15) shall
be set in mortar 5 mm
inside the vertical line of
the body. Except for the
rear where they shall be in
line with the body.
