GABRIEL KERAMIK AB
13
8
1506 mm
8
9
8
9
8
9
8
9
8
9
8
9
19
20
Assembly
Carefully centre and set the outer
rings with mortar (9).
Make sure that the outer ring (9) is
one step ahead
of each inner
block (8) - set without mortar -
during the assembly.
Outer rings and inner blocks must
not be in contact. Level vertically
and horizontally.
Check the control measurements,
see page 5.
For a better joint, wipe
the contact surfaces of the
outer rings with a squeezed
sponge. Afterwards gently
brush the mortar joints
with a wet radiator brush.
Place the inner block (8) on top
of the firebox block (7)
without
mortar joint
. Make sure that
this and the following blocks are
in level and do not ignore any
irregularities.
