13
TIMER ON :
TIMER OFF :
11
10
14
X-FAN:
TURBO:
12
15
Funcionamiento del mando a distancia
Presione el botón T-ON para iniciar el temporizador de encendido. Para cancelar el
temporizador presione de nuevo este botón.
Una vez presionado, desaparece y “ON” parpadea. Se visualiza 00:00 para programar
el temporizador de encendido. En 5 segundos, presione “+” o -” para ajustar la hora. Ca-
da vez que presiona “+” o “-” el tiempo cambia 1 minuto. Presionando continuadamente
el tiempo cambia rápidamente, primero en minutos y luego en 10 minutos.
Una vez acualizada la hora y antes de 5 segundos presione TIMER ON para confimar.
Presione esta botón para programar la oscilación de aire arriba y abajo, los cuales
cambian circularmente :
OFF
indica que las lamas oscilan como:
:
Presionando este botón en modo Frio o Deshumectación, el icono aparece y el
ventilador interior continuará funcionando durante 10 minutos para secar la unidad
interior, aunque se haya apagado la unidad.
Cunado se enciende, X-FAN esta apagado por defecto. X-FAN no esta disponible para
los modos Auro, Ventilación o Calor.
Presione este botón para activar o desactivar la función Turbo, el cual permite a la unidad
alcanzar la temperatura predeterminada en un menor tiempo. En modo COOL (refrigeración)
la unidad emitirá un fuerte aire frío a una velocidad super alta. En modo HEAT (calefacción)
la unidad emitirá un fuerte aire caliente a una velocidad super alta.
Presione este botón para iniciar el apagado automático del temporizador. Para cancelar la
programación del temporizador, presione este botón de nuevo. La programacion del apagado
del temporizador es igual que la del encendido del temporizador.
-10-
NOTE:
X-FAN is the alternative expression of BLOW for the purpose of understanding.
TEMP:
Precaución:
•
Por defecto, cuando se enciende la unidad se muestra la temperatura programada.
•
Sólo para modelos con indicador de temperatura en la unidad interior.
•
no display
Presionando este botón, puede ver la temperatura interior programada o la temperatura
ambiente interior en la pantalla de la unidad interior. El ajuste en el mando se selecciona
circularmente:
Al seleccionar en el mando a distancia, el indicador de temperatura de la unidad interior
muestra la temperatura programada, cuando selecciona con el mando a distancia, el
indicador de temperatura el la unidad interior muestra la temperaturea ambiente interior.
3s mas tarde mostrará de nuevo la temperatura programada.
Este modelo no tiene función de visor de temperatura ambiente exterior. Aunque el man-
do muestre la unidad interior seguirá mostrando la temperatura programada.
Este mando es universal. Si se envía alguna señal , o
la unidad seguirá funcionando como