Ga.Ma SALON EXCLUSIVE PRO 7.6, Руководство пользователя

Страница: 9 / 40

repaired free of charge or immediately replaced with
similar product of equal or greater value.
PRO 7.6
RECOMMENDATIONS FOR USE:
Before using the hair clipper the hair must be clean and dry. We recommend cutting small quantities of hair at
a time, adjusting the cutting length gradually until finding the one you want. The blades risk getting stuck if too
fast movements are made or if a lot of hair is cut at the same time. It can be used without attachment comb
to trim beard, neck hair and sideburns.
BEFORE USING THE APPLIANCE:
Lubricate the blade before the first use. Read the instructions contained in the section “HOW AND WHEN TO
LUBRICATE THE BLADE”.
USE INSTRUCTIONS:
Insert the desired attachment. This operation should always be done with the hair clipper turned off.
Turn on the hair clipper by pressing the (O/I) button.
Turn off the hair clipper by pressing the (O/I) button.
INSERTION OF COMBS:
The supplied combs have two lateral seats for an easier snapping on the base. To insert them on the hair
clipper, lay the blade on the comb and make it slide on it until you hear a slight click: insertion will now be
completed. To remove the combs just extract them making the blade slide outwards.
CUTTING LENGTH ADJUSTMENT:
The PRO 7.6 hair clipper offers the possibility of making finishing touches from 0.8 mm to 3 mm (if used
without any guide comb attached and using the adjustment lever) and performing classic hair cuts with the
following lengths: 3, 6, 9 and 12 mm.
ADJUSTABLE LEVER:
The lever for adjusting the cutting length is located on the left side of the body of the appliance (Fig. 1); this
lever lets you adjust the cutting height to 0.8 mm, 1 mm, 2 mm and 3 mm. 0.8 mm if held upwards, 1 mm if
moved one click towards the rear body of the appliance, 2 mm if moved two clicks towards the rear body of
the appliance, 3 mm if moved three clicks towards the rear body of the appliance.
Fig.1
CLEANING AND MAINTENANCE:
A clean and properly lubricated hair clipper considerably improves its capacity and cutting precision.
DO NOT CLEAN ANY PART OF THE APPLIANCE UNDER RUNNING WATER.
CLEANING THE HEAD:
Before any cleaning operation, make sure that the appliance is properly turned off and disconnected from the
power outlet. Remove the accessory if it is inserted. Using the special brush supplied, remove any hair
residues between the blades and the back of the blade head.
15 16