G21 Razor, Руководство пользователя

Страница: 8 / 72

Trouble shooting
If you discover the following circumstances, please inspection and handling as following:
Problem Check Action
No air blows
when hands are
inserted. Do the display indicators lights up?
Is the power switch on?
Are you putting your hands all the
way in? Check the ground-fault circuit
breaker.
Turn the power switch on.
Reput hands all the way in.
Machine works
long time after
hands drawn
out, finally stop. Any dirt or foreign body on sensor? Switch off the power button and
then remove dirt or foreign body on
sensor after the power light off, when
finished, switch on power button.
No hot wind. There is a built-in heater in the unit.
Any dirt on heating sensor?
Fuse inside terminal box blown? Is the ambient temperature higher
than 20°C?
Switch off power, remove front cover.
There is a terminal box inside. Take
down the cover of terminal box.
Check the fuse inside box which is
blown or not.
Airflow is too
low. Is the speed button on low level? Put speed button on high level.
If the above actions do not work, turn off the power and the ground-fault circuit breaker and
call your dealer to inspect and repair it if necessary.