G21 Emotion, Руководство пользователя

Страница: 17 / 100

PROBLEM SOLUTION
When there is
no power to the
juicer:
• Check if the power cord is properly plugged in.
• Check if the drum lid and the juicing bowl are properly assembled.
• Check if the top-set and the base are properly assembled.
• Juicer will not operate if parts are not assembled properly.
Low juice yield:
• Different ingredients hold different amounts of fluid that will yield different amounts of juice.
• If the ingredients are not fresh, they may contain reduced amounts of fluid,
which will yield less juice.
• Check if the compression silicone is firmly inserted.
• If the ingredient itself has low water content, it may help to soak it in water before juicing.
• If there is seed residue on the bottom of the strainer, this can affect juicer
performance and the overall juice yield.
There is too
much pulp in
the juice:
• When continuously juicing, and it depending on the ingredient, the juice
may contain a lot of fine pulp.
• To reduce the fine pulp, clean the top-set frequently and extract the pulp.
• Use a mesh strainer and put the juice through it to collect the unwanted pulp.
• If the strainer and the screw are damaged and affecting the juicer’s per-
formance, it is recommended the parts be replaced. The lifetime of each part
may vary depending on length and method of use and ingredients extracted.
• If too many ingredients are inserted at the same time, it may cause the
juicer to stop frequently. This can lead to pulpy juice, insert the ingredients
slowly and few at a time.
The drum lid will
not close:
• Make sure the juicing screw is pushed all the way in to the strainer in order
for the drum lid to close properly.
• If the juicing screw is not properly in position, the drum lid may not close.
Odd noise from
the juicer:
• Check if the parts are assembled correctly.
• Do not start the juicer unless there are ingredients and/or liquid in it.
• Operating the juicer without ingredients can cause damage to the screw.
• If the juicer is operated without ingredients or liquid, the noise level can
increase and also can lead to damage.
• The friction noise from the juicing screw and the strainer into juicer.
• If the noise occurs when ingredients are inserted into the juicer, check the
size of the ingredients.
• The noise can occur if the juicer is operated on an uneven or slanted sur-
face. Place the juicer on a horizontallly flat surface when operating.
The extracted
pulp is very
moist:
• During the very beginning of extraction, the pulp can be more moist.
• Depending on the ingredient’s condition,the extracted pulp can be affected;
especially when the ingredient is not fresh, the juice can be extracted with the pulp.
During operation,
the juicing bowl
shakes:
• The juicing screw and the strainer are set up to crush and squeeze the
ingredients. It is normal for the juicing screw and the strainer to vibrate.
• If the ingredient contains strong fiber, the vibration from the top-set may be stronger.
Troubleshooting