Quick Start Guide
UPS-100
2 - Mount Enclosure onto wall using suitable fixings
3 - Reinstall plate
4 - Place supplied battery (4) in the enclosure (bottom RHS)
5 - Attach the negative (6) and positive (5) terminals to the battery with the supplied screws and
washers (inside the accessory pack attached to the battery leads) NOTE only use LIFePO4
batteries as this is what the charge controller has been programed to charge, It is
not
suitable
for Lead Acid Batteries
The LED lights of the charge controller will come on.
G2 Security PTY Ltd
Page 2
