Quick Start Guide
UPS-100
6 - Secure the battery with the cable tie.
7- Terminate mains 220VAC supply to the bottom fuse terminal (3).
8 - Once power is supplied the charger will light and the LED sequence on the charge controller
will change.
You can now terminate the feed cable to the Fire panel from the upper fuse terminal (2)
Once you are ready to power up the attached equipment you can switch the inverter (1) switch
to the ON position where it indicates with 1 |. Do not switch to 2 bar || symbol as this is the
incorrect setting and may not power your fire panel.
G2 Security PTY Ltd
Page 3
