18
Square spindle drive for window handles
Installation and operating instructions
ELTRAL OA
3 Intended
use
This square-spindle drive is suitable for DIN lh and DIN rh installation on all customary
aluminium, PVC and timber windows. It assumes the function of the window handle and can be
used, e.g.,
in conjunction with S60 / S100 spindle drives (without integrated cut-off device)
or RWA 1000 / 1050 opening systems or
drives with integrated cut-off device for window-opening hardware.
Moreover, the square-spindle drive can be connected to the GU-BKS control module USKM.
If used with opening drives and control units of other manufacturers, our guarantee refers to the
drive's proper functioning only. It is designed and delivered
only for use in dry rooms,
for use in industrial and public buildings,
for use in private residences.
Misuse
The square-spindle drive is
not designed or intended
to be used
as lifting, transport or traction element for other than window opening
purposes, or for similar unintended purposes.
Do not install the square-spindle drive on windows provided as escape and
rescue route openings.
Compliance with the operating and servicing conditions speci
fi
ed by the manufacturer is part of
intended use. Only in this way can damage be avoided.
Changes made to the system without the approval of GU
exclude liability of the manufacturer
for resulting damages.
All deliveries are made on the basis of our General Terms and Conditions
Safety analysis
Advice on safe operation of window drives
Before a motor-driven door or window assembly is put into operation,
a safety analysis with risk assessment must be performed by the
manufacturer or supplier
1)
in compliance with directive 2006/42 EC.
To do this, a corresponding form must be prepared and signed.
1)
Marketer, planner, window and door fabricator, deliverer, installer.