E006
Page 15
6
U
SING THE PRODUCT
6.1 Set RTC Menu
Once the LM-XS PRO E006 data logger is activated by pressing
“
Up
”
key
for 10 seconds, the user
must set the RTC first. T
he user can set the RTC in one of the available calendar formats: “dd
-
mm-
yy” or “mm
-dd-
yy” by following the
sequence as shown in figure 7.
Once selected, date
format cannot be changed throughout the life of data logger.
If the user has not set the RTC
parameters, the device will go back in deep sleep mode.
After setting the proper RTC, start delay counter (10 minutes) will be turned ON and sand clock
symbol will be turned ON.
Figure 7 Set RTC Menu Sequence
