Page 17
Note: Number of data records get reduced according to number of Tag data events.
Tag
Event(s) can be seen in software application and generated pdf report after downloading
data.
5.7.3 Ending the Measurement
➢
The measurement program is ended by one of Four ways:
1.
As per the preconfigured batch stop time, the measurement will be stopped.
2.
If batch stop time is not set during the batch configuration, the measurement will
be stopped, once the maximum no. of readings has reached.
3.
By connecting the device with the LMViewE051 application, using
“
Stop
”
option.
4.
User can manually Stop the running batch if required,
by pressing “
Min/Max
” key
for about 10 seconds as shown in figure 10. Here a Manual Tag event will be logged
prior to batch stop message.
Figure 10 Manual Stop of Running Batch
➢
Once the measurement stops, “
REC
” message disappears from the device display
,
RUN
LED turns Off and
STP
LED starts flashing.
5.8 Reading out Data
5.8.1 Connecting with the Software Application
Displaying a measurement data report
➢
Connect the LM
Pro
T data logger with Windows PC via the USB port, as shown in figure
11.
➢
After connecting the data logger with PC, the display remains ON along with the other
values.
Figure 11 USB Type- A connection
