G-Technology G-SATA, Руководство по установке

Страница: 13 / 14

G-SATA Installation Guide
Page 13
8.3 Windows 2000/XP – Removing G-SATA
1. Right -click on My Computer , select Manage , and then
Device Manager .
2. Go to Disk Drives.
3. Right click on the drives contained in G-SATA and select
Remove/Disable .
4. After performing this operation, you can remove G-SATA
from the system without risk of losing any data that is
currently stored in cache memory.
8.4 Windows 2000/XP – Reconnecting G-SATA
1. Attach G-SATA to the G-SATA PCI adapter
2. Power on G-SATA. Windows will automatically detect that
G-SATA has been reconnected to the system.
Note: If you are re-attaching G-SATA after hot-swapping the unit as
explained above, you must make sure to cycle power before reconnecting
G-SATA.
9. TECHNICAL SUPPORT
If you encounter any difficulties while installing G-SATA,
please contact G-Tech Technical Support via one of the
following ways:
Telephone: (310) 449-4599
Fax: (310) 449-4670
E-mail: support@g-technology.com
Internet: http://www.g-technology.com
When contacting Technical Support, make sure to be in front
of your computer and have the following information readily
available:
• Your G-SATA serial number (on bottom of unit)
• Operating system and version
• Computer brand and model
• Amount of memory installed
• Other devices attached to your computer
Thank you for purchasing G-SATA. If you have any comments
or questions about this manual or the product, please call
(310) 44
9
-4599, or send an email to info@g-technology.com.