G-Technology G-SAFE, Руководство по установке

Страница: 8 / 19

Page 8
G-SAFE Product Guide
Pressing the ENT button on the front panel will show the
following on the LCD display.
Pressing the up arrow will display the RPM of G-SAFE’s fan
as shown below.
8. REPLACING A DISK DRIVE MODULE
In the event of a disk drive failure, the G-SAFE alarm will
sound and the LCD will display a message like that below.
Mute the alarm by pressing the MUTE button on the front
panel. The blue LED on the failed disk drive module will
also be illuminated.
Your data is still intact, but it is important that you replace
the failed drive as soon as possible. Contact G-Tech
Technical Support at (310) 449-4599 or at
support@g-
technology.com to request a new disk drive module.
Follow the directions below to replace the failed disk drive
module.
1. Power on G-SAFE.
Note: It is not necessary to have your computer powered on during this
process.
2. Identify the failed disk drive module indicated by the LCD
panel and the blue LED on the disk module (in this example
Drive 2) as shown below.
3. Remove the failed disk drive module by inserting the
provided key in to the lock hole and gently pull out the
module.
WARNING:
Be absolutely sure to remove the module
indicated by the LCD (Drive 2 is the bottom drive).
WARNING:
Removing the wrong disk drive module
can result in data loss!!