background image

122

G-TECH / Pro Competition User Guide, Release 3.1

Multiple Vehicle Usage

Many G-tech enthusiasts will want to use the G-tech in multi-
ple vehicles.

Perhaps you have several vehicles that you want to compare 
against each other... or maybe you have a friend with a vehi-
cle that you want to benchmark.

With the G-tech’s ability to support up to four vehicles, you 
just tell the G-tech about the information that is specific to 
each vehicle.

When you move the G-tech to another vehicle, just select 
that vehicle in the G-tech. The G-tech adjusts everything 
based on the vehicle you have selected.

Vehicle-Specific Data

The first time you select a vehicle in the G-tech (page 123), 
you must enter in the information specific to that vehicle 
before using it.

This is a list of the information that you must enter for each 
vehicle that you use with the G-tech:

Vehicle name (page 124)

Vehicle weight (page 23)

RPM calibration (page 25)

Engine Redline (page 20)

Shiftlights Shiftpoint RPM value (page 21)

Shiftlights On/Off setting (page 110)

Cornering Lights G Limits (page 112)

Cornering Lights On/Off setting (page 112)

Содержание Pro Competition





















































































































































































Отзывы: