Using the "FieldMate Reporter" software.
Page 21
Use this application to down load Job information from any PRO series Meter.
1: Connect the Meter to the down load cable attached to the office PC.
A : The Meter should connect to a DB15 cable
B : The DB15 cable connects to a USB serial converter with DB15 adaptor fitted.
C : The USB coverter is connected to the USB port of the office PC.
2: Start the FieldMate Reporter software by double clicking on the icon.
Note: If the reporter software is not installed, install from the factory supplied CD, or
down load the install files from
www.areameters.com
.
3: Ensure that the FM-DRILL PRO is turned on. This software will automactically detect that a PRO version
FieldMate area meter is connected. When this occurs the "DOWN LOAD
READY
" button is displayed.
4: With the FM-DRILL PRO connected to the computer. Press the "DOWNLOAD READY" button. The
data is instantly returned fromthe meter. At this point the "PRINT" and "SAVE" buttons will be enabled.
Note 1 :
If a " DOWNLOAD READY " button is not observed, check that the comm port that is
connected to the FM-DRILL PRO is the correct port. If required select the correct comm
port using the "Connect Port" button.
5: Once the job info is down loaded, click on the job buttons to display the work done for each job.
6: To save the job info to a file press the "File Save" button.
7: Any or all job data can be printed at any time, using the "Print" button..
8: The Field Mate Reporter Application will only operate with the PRO.
The FieldMate Area Meter can record all your machine based agricultural activites,
making invoicing and job tracking a breeze.
