G.T.Power A8, Руководство по эксплуатации

Страница: 17 / 23

-
15
-
The screen displays the state of charging process. To
stop charging forcibly, press
Batt type/Stop key once.
The audible sound indicates you at the end of process.
8.2 Discharging Pb battery
Set discharge current on the left and final voltage on
the right. The discharge current ranges from 0.1 to
5.0A.
To start the process, press
Start/Enter key for more
than 3 seconds.
The screen displays the current state of discharge. You
can alter the discharge current by pressing
Start/Enter
key during the process. Once you change the current
value, store it by pressing
Start/Enter button again.
To stop discharging press Batt Type/Stop key once.
The audible sound indicates you at the end of process.
9. Save Data Program
A8 has a data storage and load program for your convenience. This feature can
store up to 10 battery data by number that represent the individual specification
of batteries you are using. They can be called back for the process of charging or
discharging without setting up the program again. To set up the parameter value in
the program, press
Start/Enter key to make it blink then change the value with INC
or DEC key.
Program select.
The parameter valaue setting up in this screen
does not affect charge or discharge process. They
only represent the specification of the battery. The
following screens will automatically be displayed
exactly matched battery type you set up. The
example shows the battery pack of NiMH, 12cells and
3000mAh of capacity.