G-Systems 16A, Руководство пользователя

Страница: 10 / 15

screen part 2.
Settings of switched outputs EXIT1:
In the main menu you find “Set exit 1” = Settings output exit 1. Push the ENTER button to
get one level deeper into the menu. Than push again to “choose function”. The following
functions are available:
Ex = disabled = Output disabled
Ex = T1 heat = Output sensor 1 heat
Ex = T1 cool = Output sensor 1 cool
Ex = Rh humidify = Output sensor 1 humidify/moisturise
Ex = Rh dehumidi = Output sensor 1 dehumidify/drying
Ex = T2 heat = Output sensor 2 heat
Ex = T2 cool = Output sensor 2 cool
Ex = timer = Output timer
Scroll with UP / DOWN buttons to the desired function and confirm with ENTER. If a
function has already been selected, you can use "set value" to change the values. If you
like to switch to another function, select the new function in"Set exit 1". Change the values
or confirm the new function with the SAVE / EXIT button.
Disabled:
This function turns off the output.
Output Sensor 1 heat:
This function is measuring the air temperature and can be to connected a heater. In the
submenu you can make the following settings:
page 10 of 15
Choose function
Ex1= S1 heat
Ex1= S1 cool
Ex1= S2 humidify
Ex1= S2 dehumidi
Ex1= S3 heat
Ex1= S3 cool
Ex1= timer
Ex1= disabled
Exit 1 Sensor 1
Heat day 24.0C°
Heatnight 24.0C°
Hyst. -02.0C°