Page 9
I M P O R T A N T I N S TA L L E R N O T E S
When installing the aerial antenna cable please ensure that the cable leaves the back box by
the shortest possible route and is not coiled up and left inside the intercom.
Do not stick the aerial onto any metal surface. This will degrade the signal strength
received
Only use the 12 volts DC power supply supplied with the kit.
Please remove voicemail function from the simcard before installing into the
intercom. All major UK network voicemail removal codes are shown on page 4.
Before commissioning, please ensure the signal strength is sufficient by holding down
the P1 button for 4 seconds. You should receive a
green
LED to indicate a good signal.
If you do not receive a good signal please reposition the aerial antenna to im prove the
signal strength or alternative ly change the network provider as signal
strength can vary between the suppliers.
