Programming Dial to Open Gate Entry (Caller ID)
You can open the gate direct from a mobile phone or landline by calling the simcard number.
Once you call the number the GSM Intercom will reject the call but will take the command to
open the gate.
We have a caller ID function controlled by dipswitch 2, if this is set to ON only the numbers
stored on the simcard will be accepted to open the gate. If set to OFF there is no caller ID
security and any caller can open the gate.
To program the caller ID function you will need to do the following
Step 1
– Enter a (
hash
) then your (keycode) (
star
) then caller phone number you want
stored then (
hash
) and the position in your caller ID list (you can store up to Max
80 numbers).
Example
#
1234
*
07713055002
#
01
– To enter a number to position 01
Example
#
1234
*
07895622547
#
80
– To enter a number to position 80
If the code is accepted you will hear 5 beeps. If it is incorrect you will hear a singular long
beep. In the above example you have programmed 07713055002 as position 01 in your caller
ID list and 07895622547 as position 80 in your caller ID list.
To Delete a number you type in (
hash
), (key code), (
star
), (
hash
), then caller ID number.
Example
#
1234
*
#
01
To delete your position 1 number in your caller ID list.
If the code is accepted you will hear 5 beeps. If it is incorrect you will hear a singular long
beep.
To open the gate permanently from your phone you can send a text
#
OPEN
To close the gate just ring the simcard number this will reset and the gate will close.
We recommend keeping a seperate list of numbers stored and their positions in case you
need to amend in the future.
Page 6
