INSTRUCTIONS
IMPORTANT - PLEASE READ
Please make sure you disconnect the power when you fit the simcard. Then place the
simcard with the clipped corner facing outwards.
As seen in image above.
Connect 240 volts to the input connector as per figure 1. Once the power has been applied
the blue network LED will flash once every second. Once a signal has been found the
green LED will come on and stay on, indicating that the unit is now ready for use.
1. Firstly, please register and put credit on the simcard. Follow the instructions given by
your simcard provider.
2. Insert the simcard into a mobile phone and disable the voicemail using the codes
below.
Vodaphone call 1210
Tesco
call 2915
T-Mobile
call 222
O2
call 1760
Orange
call 4502
GiffGaff call 1626
E - Send the text message VM OFF to 150
Signal Strength
To help make sure that you place the unit in a suitable position you can text the unit to see
how much signal the unit is receiving. Simply text the command
#
SIGNAL
#
The unit will perform a test on the signal strength
You will receive a text telling you the signal strength score between 0-30. We strongly
recommend that you place the unit where you will receive a score of at least 10. You will
find that a signal score of less than 10 will make the unit unreliable.
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Page 3
