How to turn ON / OFF the Alarm
Once you have paired and positioned the sensors and key fobs the alarm is ready to be
used.
Arm Using Text Message
To set the alarm to ON you will need to send the text message
#
ALARM
=
ON
#
This will activate the alarm
#
ALARM
=
OFF
#
This will deactivate the alarm
Arm Using the Key Fob
The key fob works best when used with the siren provided as this provides an audible
alert whenever you arm or disarm the alarm.
Press Button A on the Key Fob
This ARMS the alarm.
The siren will beep TWICE
Press Button B on the Key Fob
This DISARMS the alarm
The siren will beep ONCE
IMPORTANT - PLEASE READ
Once the Alarm has been alarmed, it will stay alarmed even after an alarm activation. To
turn the alarm off and stop further alarm messages, you will have to disarm the alarm by
text or key fob
How to Use The Siren Output
The unit has been programmed to trigger the siren for 60 seconds in the event of an
alarm activation. Once the text message has been received you can STOP the siren
sounding by pressing B on the key fob.
The length of time the siren sounds for can be altered from 10 to 90 seconds by sending
the text command
#
SIREN
=
0
#
Turns siren OFF
#
SIREN
=
1
#
Sets siren to sound for 10 seconds upon activation.
#
SIREN
=
6
#
Sets siren to sound for 60 seconds upon activation (default setting)
#
SIREN
=
9
#
Sets siren to sound for 90 seconds upon activation
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Page 6
