Pg.07
1.1. Manufacture in steel (1020) plate with epoxy finishing and cabinet completely closed.
1.2. This equipment conforms ABNT safety norms.
1.3. The CL 300 SL cylinder maximum rolling out capacity is 2 Kg of dough. Exceeding this
limit may reduce the components durability.
1.4. Electrostatic painting (epoxy) and stainless steel with chromed cylinders as optional.
1.5. Steel-plated roller bearings are used in its manufacturing.
2.1. Before installing your machine, check if the voltage conforms your mains supply:
110/220V for the single phase equipment and 220/380V for the three phase equipment.
2.2. Install your equipment on a flat surface.
2.3. Always remember to connect the earth wire.
3.1 This cylinder has been developed to roll out dough and to make bread dough.
3.2 Practical cylinder(roller)opening system, simply operated through the frontal flywheel with
visual indication.
4.1 Before cleaning your equipment, make sure it is disconnected from the mains supply.
4.2 Use a damp cloth for cleaning the machine.
4.3 Dry well the cylinders(rollers) after cleaning the equipment.
4.4 Don't pour water over the equipment when cleaning it.
CL 300 SL
5.1. If your equipment is not working according to its specifications, have the till receipt and
Instructions Manual at hand and contact G.Paniz Customer Service, and we'll inform you
about the nearest Authorized Service Center.
5.2 CL 300 SL cylinder does not need lubrication.
CL 300 SL LAMINATING CYLINDER
