gm-elektronik.swiss | [email protected]
Datasheet 1811.001
MICROPHONE CONSOLE VA-FMCT-500
Page 5 | 12
2.1. Sending out a service (broadcasting) call hands-free
To send out a service message hands-free to the broadcasting areas, press the PTT button (E) and hold it down. The green
indicator will light up to show that the microphone is active. Before speaking, remember to wait for the yellow BUSY LED to
turn off, indicating the end of the chime. If no zone was selected in advance, the call will be sent to all the zones of the system,
and therefore all the indicators (I) on the display will turn green.
25
UK
TSC6000-EN
The
TSC6000-EN station enables the following to be done via the system:
3.1 Sending out a service (broadcasting) call hands-free.
3.2 Sending out emergency messages hands-free.
3.3 Sending out pre-recorded evacuation /alert messages.
3.4 Sending out messages selectively to broadcasting zones.
3.5 Resetting emergency messages / Muting the buzzer to acknowledge a failure.
3.1 Sending out a service (broadcasting) call hands-free
To send out a service message hands-free to the broadcasting areas, press the
PTT
button (E) and
hold it down. The green indicator will light up to show that the microphone is active.
Before speaking, remember to wait for the yellow
BUSY
LED to turn off, indicating the end of the
chime. If no zone was selected in advance, the call will be sent to all the zones of the system, and
therefore all the indicators (
I
) on the display will turn green.
If you wish to address messages only to some zones or groups of zones, consult point 3.4
Sending out
messages selectively to broadcasting zone
(page 28).
To end the call,
release the
PTT
key.
25
UK
TSC6000-EN
The
TSC6000-EN station enables the following to be done via the system:
3.1 Sending out a service (broadcasting) call hands-free.
3.2 Sending out emergency messages hands-free.
3.3 Sending out pre-recorded evacuation /alert messages.
3.4 Sending out messages selectively to broadcasting zones.
3.5 Resetting emergency messages / Muting the buzzer to acknowledge a failure.
3.1 Sending out a service (broadcasting) call hands-free
To send out a service message hands-free to the broadcasting areas, press the
PTT
button (E) and
hold it down. The green indicator will light up to show that the microphone is active.
Before speaking, remember to wait for the yellow
BUSY
LED to turn off, indicating the end of the
chime. If no zone was selected in advance, the call will be sent to all the zones of the system, and
therefore all the indicators (
I
) on the display will turn green.
If you wish to address messages only to some zones or groups of zones, consult point 3.4
Sending out
messages selectively to broadcasting zone
(page 28).
To end the call,
release the
PTT
key.
If you wish to address messages only to some zones or groups of zones, consult point 2.4.3. Sending out messages selec-
tively to broadcasting zone (page 7). To end the call, release the PTT key.
2.2 Sending out emergency messages hands-free
To send out an emergency message hands-free to the broadcasting zones, it is necessary fi rst of all the place the station in
the emergency mode:
1. Lift the lid protecting the EMERGENCY key (5) and press the key. It will light up steadily to indicate that the emergencymo-
de has been activated. The background of the display will change colour and all the zone keys will turn green to indicate
26
UK
TSC6000-EN
3.2 Sending out emergency messages hands-free
To send out an emergency message hands-free to the broadcasting zones, it is necessary rst of all
the place the station in the emergency mode:
1.
Lift the lid protecting the
EMERGENCY
key (
4
) and press the key. It will light up steadily to indicate
that the emergency mode has been activated. The background of the display will change colour
and all the zone keys will turn green to indicate general pre-selection.
2.
Press the
PTT
key and hold it down. The red
ALARM
LED will light up and the green indicator will
show that it is possible to speak via the microphone. If no particular zones have been selected
in advance, the message will be broadcast in all the zones. If you wish to address the message
only to some speci c zones or groups of zones, see point 3.4,
Sending out messages to selected
broadcasting zones
(page 28).
N.B.: Remember that the PTT key has priority over any pre-recorded messages already being
sent out.
To end the hands-free emergency message, release the
PTT
key and press the
EMERGENCY
button
again, remembering to close the lid.
NOTE: An emergency condition can be stopped only by a station with a higher priority or by
local commands by the system (VAIE 6500 or VAC 2006).
