g-lites ARCH 90 90X3W, Руководство пользователя

Страница: 9 / 17

Recommend to use the DMX signal terminator for the installation to
avoid the electronic noise damage the digital control signal. Simply
speaking, DMX terminator is an XLR connector with a 120
Ω /1w resistor
connected across pin 2 and 3.Which is then plugged into the output
socket on the last projector in the chain. Refer to the connection as
above:(Picture ).We suggest using the DMX signal distributor when the
distance of the lights over 15meter,In case of effect the light
communication because of the signal feeble.
3. Light power connection:
After doing the above operation and making sure all the projectors
had been installed with natural operate, press the power switch to check
whether everything is working normally.
9