G.I.KRAFT GI12117, Руководство пользователя

Страница: 13 / 19

3 、 Operation
Page.11
a、spot welding
Select welding function
Connect spot welding
electrode tip with welding
gun and tighten.
Approximately a 90°angle
to the workepiece surface.
Put on pressure and press trigger.
Set correct time.
Remark:
1 、 Setting amperage too high or time too long can cause workpiece surface (vehicle body)damage .
Please weld other workpieces for practice before actual operations.
2 、 Setting correct amperage and time according to the workpiece thickness.
3 、 Continuing another operation is applicable after these procedures finished .If not, please
shut off the main power supply and switch off the unit.
Connect negative outside wire
to a clean,paint-free location
on metal workpiece,as close to
welding area as possible.
(Position C is recommend).
Set correct power