G.I.KRAFT GI12117, Руководство пользователя

Страница: 11 / 19

Operation
1 、 Controls
Page.9
1. Power indicator
2. Error indicator
3. Overheat indicator
4. Gun trigger indicator
5. Spot welding time display
6. Power percentage display
7/8. Spot welding time adjustment
9/10. Power percentage adjustment
1. Connect input power properly and safely
2. Turn on the power switch, select different functions through
function selection buttons according to required working mode.
3. Appropriately adjust welding time and power according to actual
situation.
4. After setting the parameters, the machine enters into standby
mode and is ready to weld.
5. When the temperature exceeds normal working temperature, the
temperature indicator will light and overload protection will
start. Wait a few minutes until the indicator is off, then use the
machine again.
6. The error indicator will light when the machine goes wrong, and
the machine enters into automatic protection mode. Cut off the
power supply then check, use the machine again until the problems
are solved.
Instruction:
1
2
3
4
5 6
7
8
9
10
11
12