5
SB 500
SEMI-AUTO
Original Instructions -Rev.00- 2015— In compliance with the paragraph 1.7.4 of the Machine
Directive 2006/42/CE
G.B.C. Industrial Tools S.p.A.
Via Artigiani,17 – 25030 Torbiato di Adro (Bs) – Italia – Tel. + 39 030 7451154 – Fax. + 39 030 73 56 629
Using properly the safety gear entails the only risks to be generated by the user’s system and
not by inborn defects of our machines.
G.B.C. Industrial Tools S.p.A. designs and assembles its machines in strict compliance with the
safety regulations provided by the applicable EC directives and by the Italian laws regulating this
matter.
G.B.C. Industrial Tools S.p.A. declines any responsibility for misuse of its machines and their use
when in contrast with the regulation listed hereinafter and with the use and maintenance instructions
hereto.
•
Carefully read ALL the following regulations and the instructions herewith attached before
starting any operation.
•
Carefully ensure that the operator and the foreman using the machine are fully aware of all the
regulations and all the instructions and that they are qualified to operate the unit.
•
Strictly attain to the indications given by the international symbols applied on the machine
and/or on its case.
•
Do not perform any maintenance operation when the machine is plugged to the power supply.
•
Before every use, ensure the power supply connections to be conform to the specs given by our
manual.
•
Supply adequate illumination to the working area;
•
Ensure the working area allows a clearance around the operator of at least 1,5mt tore)
•
Do not replace the control panel and replace any part with original GBC parts.
•
Do not use pressurized water on the machine.
•
Do not touch hot and sharp parts
•
The Instruction manual and the drawings will always give you quick and simple
explanations.
•
Any case not specified in this paragraph will require the manufacturer authorization.
SAFETY PRESCRIPTIONS
