-27-
Clock:
After inserting the batteries, the clock starts synchronizing
with the DCF-77 time signal. The DCF-77 reception icon
starts flashing to indicate that the DCF-77 signal is being
received.
flashing
on
off
busy receiving the
DCF-77 signal
DCF-77 signal
reception successful
no DCF-77 signal
received
The clock automatically starts synchronizing with the DCF-77
signal at 2am and 3am. If this fails, the clock will try again at
4am and 5am.
You may also manually synchronize the clock by pressing and
holding the button for 3 seconds. The reception icon
starts flashing.
The synchronizing process will take several minutes.
During summer time the DST icon appears. DST stands for
Daylight Saving Time.
To manually set the time:
If it’s not possible to receive the DCF-77-signal, you may set
the clock time manually. During the manual setup, several
other functions may be set.
Press and hold the “
TIME SET
” button for 3 seconds until RCC
“ON” or “OFF” starts flashing. Use the “
▲
” and “
▼
” buttons to
set the values. Press the “
TIME SET
” button to confirm each
step.
