the manufacturer or supplier before servicing.
7.Keep charger as far away from children as practical. Properly install and ground this
equipment. Electric shock can kill.
To prevent dangers and accidents, a person to keep an eye on the device and battery
during the whole charging process is strictly required. Do not place or operate the
charger near water, in wet locations or outdoors.
Important!
1. Fully use the length of charging cables to keep the charger away from the battery when
connecting the charger to the battery.
2. Never place the charger on top of a battery.
3. Keep well-ventilated and dry condition.
4. Make sure the power supply and charging clamps is properly connected
5. Press Start/Stop button and disconnect the clamps to stop the charger during charging
process. Do not disconnect the power by simply unplugging the charger. After charging,
disconnect the charger from the mains, then disconnect the clamps from the car body and
then disconnect the clamp from the battery, in the indicated order.
6. It will take a longer time for the battery to be fully charged as there will be a relatively
longer time for floating charge.
7. Never attempt to charge a damaged or short-circuited battery.
Operation
Before starting the charger, it is very important to ensure that:
1. The facility supply voltage is the same as shown on the charger name plate.
2. The charger is correctly connected both to the mains and battery.
3. The battery type, battery voltage and operating mode are correctly selected. Otherwise
it may cause damage to the vehicle or charger.
This charger has 4 work modes, including 1 hidden mode.
