IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product for future
reference.
BEFORE USE
You must inspect this product and its power supply before use for any signs of damage. If
the products or its lead are damaged in anyway, DO NOT use it, and contact your supplier
immediately.
PRODUCT SAFETY
• Only use on flat stable surfaces
• Do not look directly into the beams.
• For indoor use only
• Do not use in bathrooms, or in wet or damp locations.
• Not suitable for people with photo sensitive epilepsy or similar conditions.
• Only use with the included power supply.
• Do not leave this product switched on when not attended.
• The power supply should be switched off and disconnected from the mains when not in use.
OPERATION
Connect each pod to the central controller via the DC sockets on the back of the units.
Connect the power supply to an appropriate wall or socket and the lead to the power input on the
reverse of the unit.
Switch the unit on or off via the button on the front of the product
Music (Sensitivity) Control: Controls the sensitivity of the built in microphone
Speed Control: Increases the rate of response of the sound to light function.
Adjust these two rotary knobs to achieve the desired effect.
MAINTENANCE
Always disconnect the units from its power supply before cleaning
Cleaning:
Clean the outside of the units with a soft damp cloth, with a drop of washing-up liquid. Dust can
be removed by using a small paint brush or similar.
FAULT-FINDING
Lights do not come on:
Check the unit is switched on via the switch on the front of the unit and also that the unit is
attached to the mains via the PSU supplied.
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge
to the end-user.
When replacing an existing appliance with a similar new appliance your retailer may take the old
appliance for disposal.
