FW Murphy Selectronic S1501 series, Инструкция по установке и эксплуатации

Страница: 21 / 34

Section 50 00-02-0271
2018-10-23 - 17 -
System Set Up Menus
While the S1501 displays “Waiting On Start”, pressing the MODE key will access the SYSTEM
SET UP menu. The following options are available:

Timer Set Up

Tach/Crank Set Up

ETM Set Up

Sensor Set Up
Timer Set Up - This set up screen allows you to preset the system timers. Zeroing out a
function’s timer will bypass that particular function.
Advanced Set Ups (password protected screens)
The following Set Ups are available only under ADVANCED SETUP mode.
Tach/Crank Set Up - This set up screen allows you to calibrate the internal tachometer with
pulses per revolution and set the Overspeed, Underspeed, Crank Attempt set points, and
Crank Disconnect.
ETM Set Up - This set up screen allows you to preset the Elapsed Time Meter (ETM).
Sensor Set Up - This set up screen allows you to edit shutdown or alarm messages and also
to edit the input sensor class (A, B1, B2, C, P, or ESD) and the action (Alarm only or
Shutdown).
NOTE: Communications will be disabled while using the keypad to
access the System Setup menu.