FW Murphy Centurion C5, Быстрый старт

Страница: 8 / 16

Section 50 00-02-1033
2018-12-03 - 8 -
Before Starting the Equipment for the First Time
If you are using an M-VIEW Touch Series Display, skip this procedure and go to the next procedure titled
Setup
– M-VIEW-Touch Series Display
.
Setup – MV-5-C Display
Read and follow steps in the order listed.
1. Locate the system drawing inside the panel and verify its drawing number matches the sticker on
the lower front panel.
2. Locate the legend of the drawing and find the configuration description. Record this description.
3. Power up the Centurion System.
a. Allow time for the display to boot up and land on the Home / Gage screen, approximately
15 seconds.
b. From the Centurion Home / Gage screen, touch the Arrow key to scroll left until you find
the screen FW Murphy
– MVIEW screen.
c. Verify that the configuration description matches the one you previously recorded from
the drawing legend.